Brush cutter is 2 stroke power, should notice from three respects of power , using and cutter while using , to guarantee the normal use of the machine:

1. gasoline engine:

A. The rate of qualified gas and oil should be 25. 1 ;

B. Check and change the air filter and check the spark plug regularly (25 hours)

C. Should have a rest for 10 minutes after using up one tank of oil, clear up the spacer of the machine after using , guarantee to dispel the heat

D. When do not use , must clear up the engine , put and lose the mixable fuel, burn the fuel in the vaporization ; Pull down the spark plug, put 1-2ml two stroke oil to the cylinder , pull the starter 2-3 times, install on the spark plug.

2. Transmission: Supplement the lubricating grease regularly (25 hours ) for the gearbox , put the lubricating grease on the top of the drive shaft and the connection of clutch drum.

3. cutter:. The length of nylon brush cutter head should be < =15cm, while using the blade, should guarantee the balance of the blade , can't use the blade with vibration